Jump to contentJump to search


Bruker Avance III - 300: 11B{1H}-NMR

Frequency 96.3 MHz
Required Time  (128 pulses):
If it is necessary in order to increase the signal to noise ratio, the number of pulses can be increased. The measurement time increases accordingly.
6:01 min plus 4 min for changing the sample:
For each sample, not for each experiment, an additional 4 min (in addition to the duration of the pulse sequence multiplied with the number of pulses) are needed. . This time is required due to handling of the sample by the auto sampler and calibration of the sample (tuning, matching, shimming).
Spectral Width: -100 ppm to 100 ppm
Responsible for the content: